OEM Factory for One Man Scissor Lift - Hydraulic Drive Scissor Lift – Daxin
OEM Factory for One Man Scissor Lift - Hydraulic Drive Scissor Lift – Daxin Detail:
|
Model No. |
DX06 |
DX08 |
DX10 |
DX12 |
|
Lifting Height (mm) |
6000 |
8000 |
10000 |
12000 |
|
Working Height(mm) |
8000 |
10000 |
12000 |
14000 |
|
Lifting capacity |
300 |
300 |
300 |
300 |
|
Folding maximum height-guardrail unfolding (mm) |
2150 |
2275 |
2400 |
2525 |
|
Folding maximum height-guardrail removed (mm) |
1190 |
1315 |
1440 |
1565 |
|
Overall Length (mm) |
2400 |
|||
|
Overall Width (mm) |
1150 |
|||
|
Platform Size (mm) |
2270×1150 |
|||
|
Platform extend size (mm) |
900 |
|||
|
Minimum ground clearance-folding (mm) |
110 |
|||
|
Minimum ground clearance-rising (mm) |
20 |
|||
|
Wheelbase (mm) |
1850 |
|||
|
Minimum turn radius-inner wheel (mm) |
0 |
|||
|
Minimum turn radius-outer wheel (mm) |
2100 |
|||
|
Running speed-folding (km/h) |
4 |
|||
|
Running speed-rising (km/h) |
0.8 |
|||
|
Rising/falling speed (sec) |
40/50 |
70/80 |
||
|
Battery (V/AH) |
4×6/210 |
|||
|
Charger (V/A) |
24/25 |
|||
|
Maximum climbing ability (%) |
20 |
|||
|
Maximum working allowable angle |
2-3° |
|||
|
Way of control |
Electro-hydraulic proportion control |
|||
|
Driver |
Double front-wheel |
|||
|
Hydraulic drive |
Double rear-wheel |
|||
|
Wheel size-stuffed&no mark |
Φ381×127 |
Φ381×127 |
Φ381×127 |
Φ381×127 |
|
Whole weight (kg) |
1900 |
2080 |
2490 |
2760 |
Details
|
America CUITIS Electric Control Handle on the Platform |
Foldable Guardrails with Automatic Lock Gate |
Extendable Platform 900mm |
|
|
|
|
|
High Strength Scissors,Produced by Rectangle Tubes |
Italy Hydrappp Hydraulic Pump Station and Italy Doyle Hydraulic Valve |
Firm and Durable Chassis with Tilt Sensor Alarm |
|
|
|
|
|
America TORJAN Battery Group and Shanghai SHINENG Intelligent Charger |
Battery Charger Hole |
A.Control Panel on Chassis |
|
|
|
|
|
America White Non-marking PU Driving Wheels |
Power Switch |
Spray Paint Treatment Anti-corrosion |
|
|
|
|
Product detail pictures:
Related Product Guide:
GLASS VACUUM LIFTER equipment is mainly used for handling and installing glass panels, suitable for various glass panel factories, home improvement companies and warehouse glass panel handling and other work. However, we can change the material of the suction cup so that our GLASS VACUUM LIFTER equipment can absorb and handle more materials, such as marble slab, granite slab, iron plate, steel plate and so on. But there is a point of knowledge that is particularly important here, that is, the sheets of various materials that are adsorbed cannot leak. If air leakage occurs, a vacuum state cannot be formed in the suction cup at all, which makes the suction cup unable to absorb. Many customers do not understand this point, and we always try our best to explain it. There are basically two types of suction cups, sheet suction cups and glass suction cups. Glass suction cups usually use rubber suction cups, and sheet suction cups usually use sponge suction cups. For the sponge suction cup, the suction cup of this material can also absorb the uneven surface of the flat plate, because the sponge is flexible, it can automatically fill the sponge into the uneven recessed position when the vacuum machine starts to work. Only after this process can the uneven sheet be successfully lifted up by adsorption. OEM Factory for One Man Scissor Lift - Hydraulic Drive Scissor Lift – Daxin , The product will supply to all over the world, such as: Czech republic, Philippines, Philippines,
By Agustin from Austria - 2018.05.22 12:13
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Sandy from kazan - 2017.06.16 18:23
