Hydraulic 2 Post Workshop Lift
DAXLIFTER Automotive Service Equipment
Two Post Car Lift
CFR Series 2 Post Vehicle Lift 3500–5000kg
Electric hydraulic two post lift for auto repair shops, tire centers and wheel alignment bays — 120mm minimum height, dual-side mechanical or pneumatic unlock, five capacity models from CFR3500 to CFR5000-P.
DAXLIFTER CFR Series Two Post Car Lift
Two Post Car Lift Built for Busy Workshops
DAXLIFTER CFR Series two post car lift is a heavy-duty electric hydraulic 2 post lift engineered for auto repair shops, tire centers and wheel alignment bays, offering 3500kg to 5000kg lifting capacity, 1750mm to 1900mm lifting height, a low 120mm minimum height for low-clearance vehicles, 3630mm to 4420mm column height, 2800mm to 3220mm width between columns, 2.2Kw to 3.0Kw motor power, and dual-side mechanical unlock or pneumatic unlock across five models — CFR3500, CFR4000, CFR4500, CFR4500-P and CFR5000-P — a dependable two post vehicle lift for daily maintenance, chassis service and tire work.
120mm Min Height
1750–1900mm Lift Height
2.2–3.0Kw Motor
Mechanical / Pneumatic Unlock
Why Choose the DAXLIFTER CFR 2 Post Lift
01 / CAPACITY
Heavy-Duty Capacity 3500–5000kg
Five models from CFR3500 to CFR5000-P cover cars, SUVs, pickups and light commercial vehicles, so one shop serves a wide vehicle mix with a single lift series.
02 / ENTRY
120mm Ultra-Low Minimum Height
Sports cars and lowered vehicles drive straight onto the runway without ramps or blocks, saving setup time on every job.
03 / UNLOCK
Mechanical or Pneumatic Unlock
Standard models hold securely with dual-side mechanical unlock; CFR4500-P and CFR5000-P add pneumatic release for faster simultaneous unlocking at busy work bays.
04 / CLEARANCE
Tall Columns, Wide Clearance
3630–4420mm column height and 2800–3220mm width between columns accommodate vans and wide-body vehicles while keeping the work area open.
05 / POWER
Smooth Electric Hydraulic Lifting
2.2Kw–3.0Kw hydraulic power units raise loads smoothly and quietly with low routine maintenance, ideal for high-frequency workshop use.
06 / INSTALL
Shop-Friendly Installation
Only 3380mm installation width requested for four models (3920mm for CFR5000-P), making the lift easy to fit into existing service bays.
CFR Series Specifications
Two post car lift technical parameters — five models for capacities from 3500kg to 5000kg.
| Model | Lifting Capacity | Lifting Height | Min Height | Column Height | Width Between Column | Installation Width Request | Motor Power | Unlock Mode |
|---|---|---|---|---|---|---|---|---|
| CFR3500 | 3500kg | 1750mm | 120mm | 3630mm | 2800mm | 3380mm | 2.2Kw | Two Side Mechanical Unlock |
| CFR4000 | 4000kg | 1750mm | 120mm | 3630mm | 2800mm | 3380mm | 2.2Kw | Two Side Mechanical Unlock |
| CFR4500 | 4500kg | 1750mm | 120mm | 3630mm | 2800mm | 3380mm | 2.2Kw | Two Side Mechanical Unlock |
| CFR4500-P | 4500kg | 1800mm | 120mm | 3830mm | 2800mm | 3380mm | 2.2Kw | Pneumatic |
| CFR5000-P | 5000kg | 1900mm | 120mm | 4420mm | 3220mm | 3920mm | 3.0Kw | Pneumatic |
Unlock Modes & Safety Design
Dual-Side Mechanical Unlock
CFR3500 / CFR4000 / CFR4500 — independent locking on both columns holds the vehicle securely at every service height, with deliberate two-side release for safe operation.
Pneumatic Unlock
CFR4500-P / CFR5000-P — one-touch pneumatic release unlocks both sides simultaneously, cutting cycle time in high-throughput tire and quick-service shops.
Safety & Structure Highlights
Overhead beam construction keeps the two columns stable during lifting · low 120mm entry height · hydraulic power unit sized 2.2Kw / 3.0Kw for smooth, controlled raising and lowering · 2800–3220mm width between columns keeps the working area open for technicians.
Where the Two Post Car Lift Works
Tire shops (mounting, balancing, rotation)
Wheel alignment bays
Used-car reconditioning
Chassis & suspension service
Body shops & detailing stations
Two Post Car Lift FAQ
What is the lifting capacity of the DAXLIFTER CFR two post lift?
The CFR series covers 3500kg to 5000kg across five models; the CFR5000-P lifts up to 5000kg for SUVs, pickups and light commercial vehicles.
Can a low sports car drive onto this 2 post lift?
Yes. The 120mm minimum height lets low-clearance vehicles enter the runway without ramps or blocks.
What is the difference between CFR4500 and CFR4500-P?
The -P models use pneumatic unlock and step up lifting height to 1800mm or 1900mm and column height to 3830mm or 4420mm.
What installation space does a two post car lift need?
3380mm installation width is required for CFR3500 to CFR4500-P, and 3920mm for the CFR5000-P.
What motor power does the lift use?
Standard models use 2.2Kw and the CFR5000-P uses 3.0Kw.
Is the lift suitable for wheel alignment bays?
Yes. 2800mm / 3220mm width between columns leaves clear working space for alignment equipment and technician access.
Get a Factory-Direct Quote for the CFR Series Two Post Car Lift
Share your vehicle mix and workshop layout — DAXLIFTER will help you pick the right model from CFR3500 to CFR5000-P and answer your two post lift questions.
