Conveyor‑Roller Scissor‑Type Elevating Platform
Modern production workshops call for reliable elevation equipment to streamline goods shifting between different working heights. The DXR‑series scissor‑type elevating platform is built for exactly this industrial‑site requirement. Two load‑bearing grades are available, rated for 1000 kg and 2000 kg respectively. This product range covers sixteen distinct set‑ups, with platform dimensions varying from 1300×820 mm up to 2000×1800 mm. When fully lowered, the unit can sit as low as 205 mm above ground, while maximum upward travel reaches 1400 mm. Rollers integrated onto the top deck allow pallets, storage containers and work‑pieces to slide onto and off the platform with minimal manual pushing force. Self‑weight differs from unit to unit: compact variants weigh around 160 kg, and the largest configuration goes up to 500 kg, delivering rigid frame performance without limiting installation flexibility. These elevating devices fit assembly workflows, packaging zones, warehouse premises and loading zones, delivering steady hydraulic‑driven vertical movement to safeguard both operating staff and transported goods.
Core Functional Highlights & On‑Site Benefits
Deck‑Integrated Roller Assembly
Galvanised steel rollers spread over the full top surface support multi‑direction movement of loaded pallets. It cuts manual labour for material shifting and shortens item transfer cycles compared against standard flat‑deck elevation benches.
Dual Load‑Rating Options
Sixteen hardware set‑ups across 1000 kg and 2000 kg classes cover multiple platform footprints and vertical‑travel figures, matching diverse on‑site operational demands.
Low‑Clearance Structural Layout
Minimum closed‑state height starts from 205 mm. Units can be placed directly on finished floors without digging foundation pits, and pallet trucks can approach from four directions for easy loading tasks.
High‑Strength Scissor Framework
Thick structural steel forms double‑scissor construction. Stress‑relief treatment and self‑lubricating hinge sleeves extend service lifespan under repeated lifting‑lowering cycles.
Multi‑Layer Safety Arrangement
Mechanic supporting brackets for overhaul work, anti‑skid roller surface, emergency stop function, hydraulic over‑pressure protection, plus CE‑approved electric and hydraulic assemblies are supplied as standard.
Rigorous Pre‑Delivery Validation
Each finished unit completes continuous load simulation running for 48 hours before dispatch. Hydraulic cylinders undergo pressure testing at 150 % of nominal load value for stable real‑world operation.
Two Load‑Grade Groups for Varied Working Scenarios
Built‑In Safety Configurations
- Mechanical support brackets for equipment overhaul and lock‑out status
- Anti‑slip roller surface plus perimeter guard barriers
- Emergency halt button fitted on handheld operation pendant
- Hydraulic pressure relief setup for overload prevention
- Obstacle detecting proximity sensors available as optional fit
- Electrical and hydraulic assemblies conforming to CE requirements
Technical Specifications
| Model | Load | Platform Size (L×W) | Min Platform Height | Platform Height | Weight |
|---|---|---|---|---|---|
| 1000kg Load Capacity Standard Scissor Lift | |||||
| DXR 1001 | 1000kg | 1300×820mm | 205mm | 1000mm | 160kg |
| DXR 1002 | 1000kg | 1600×1000mm | 205mm | 1000mm | 186kg |
| DXR 1003 | 1000kg | 1700×850mm | 240mm | 1300mm | 200kg |
| DXR 1004 | 1000kg | 1700×1000mm | 240mm | 1300mm | 210kg |
| DXR 1005 | 1000kg | 2000×850mm | 240mm | 1300mm | 212kg |
| DXR 1006 | 1000kg | 2000×1000mm | 240mm | 1300mm | 223kg |
| DXR 1007 | 1000kg | 1700×1500mm | 240mm | 1300mm | 365kg |
| DXR 1008 | 1000kg | 2000×1700mm | 240mm | 1300mm | 430kg |
| 2000kg Load Capacity Standard Scissor Lift | |||||
| DXR 2001 | 2000kg | 1300×850mm | 230mm | 1000mm | 235kg |
| DXR 2002 | 2000kg | 1600×1000mm | 230mm | 1050mm | 268kg |
| DXR 2003 | 2000kg | 1700×850mm | 250mm | 1300mm | 289kg |
| DXR 2004 | 2000kg | 1700×1000mm | 250mm | 1300mm | 300kg |
| DXR 2005 | 2000kg | 2000×850mm | 250mm | 1300mm | 300kg |
| DXR 2006 | 2000kg | 2000×1000mm | 250mm | 1300mm | 315kg |
| DXR 2007 | 2000kg | 1700×1500mm | 250mm | 1400mm | 415kg |
| DXR 2008 | 2000kg | 2000×1800mm | 250mm | 1400mm | 500kg |
Main Deployment Scenarios
Automobile Assembly Lines
Adjust mounting height for engine assemblies, transmission sets and chassis parts. Roller‑aided goods transfer links different production work‑stations.
Storage & Goods Distribution Zones
Lift pallets to match conveyor working height for seamless inbound‑outbound material flow, lowering forklift operation frequency.
Packaging & Order‑Fulfillment Workshops
Tune deck elevation to fit operators’ ergonomic requirements. Rollers support smooth carton movement and sorting workflows.
Metal‑Processing & Fabrication Shops
Raise heavy steel sheets, welded assemblies and machined components for handling between processing machinery and inspection stations.
Food‑Processing & Beverage Workshops
Stainless‑steel roller alternatives are available for sanitary‑critical zones requiring regular washing and disinfection procedures.
Printing & Paper‑Manufacturing Premises
Manage large paper rolls and stacked printed products. Precise height adjustment prevents surface damage during roller‑supported transfer.
Modifiable Configuration Options
Every manufacturing site presents unique workflow constraints. The DXR‑series elevating platform supports targeted modification to satisfy special‑purpose operational conditions:
Advantages Of Our Lifting Hardware
Specialised in hydraulic elevation‑equipment development and production, our engineering team balances robust product performance with competitive cost positioning. Units are built to cope with demanding operating conditions across global industrial premises. Every DXR‑series platform undergoes continuous load cycling testing over 48 hours prior to shipment, with cylinder components pressure‑verified at 150 % of nominal safe‑working load. Worldwide partner networks support fast delivery of replacement spare components, while our technical team offers long‑term guidance covering installation work, routine maintenance and workflow optimisation suggestions.
Get in touch to define the most suitable roller‑deck scissor‑lifting unit matching your on‑site workflow. Our technical department can deliver custom layout proposals, CAD files and workflow‑benefit assessment for your production facility.
Obtain Project‑Tailored Quotation
Share your required safe working load, platform dimension and vertical‑travel parameters. Our technical staff will send targeted proposals within 24 working‑hours.
