OEM/ODM China Glass Suction Cup Lifter - Vertical Wheelchair Lift – Daxin
OEM/ODM China Glass Suction Cup Lifter - Vertical Wheelchair Lift – Daxin Detail:
|
Model Type |
VWL2510 |
VWL2515 |
VWL2520 |
VWL2525 |
VWL2530 |
VWL2535 |
VWL2540 |
VWL2550 |
VWL2560 |
|
Max. Platform Height |
1000mm |
1500mm |
2000mm |
2500mm |
3000mm |
3500mm |
4000mm |
5000mm |
6000mm |
|
Load Capacity |
250kg |
250kg |
250kg |
250kg |
250kg |
250kg |
250kg |
250kg |
250kg |
|
N.W/G.W(kg) |
350/450 |
450/550 |
550/700 |
700/850 |
780/900 |
850/1000 |
880/1050 |
1000/1200 |
1100/1300 |
|
Machine Size(mm) |
2000*1430*1300 |
2500*1430*1300 |
3000*1430*1000 |
3500*1430*1000 |
4000*1430*1000 |
4600*1430*1000 |
5100*1430*1000 |
6100*1430*1000 |
7100*1430*1000 |
|
Packing Size(mm) |
2200*1600*1600 |
2700*1600*1600 |
3200*1600*1600 |
3700*1600*1600 |
4200*1600*1600 |
4800*1600*1600 |
5300*1600*1600 |
6300*1600*1600 |
7300*1600*1600 |
|
Platform size |
1430*1000mm skid proof checkered steel |
||||||||
|
Min Platform height |
60mm |
||||||||
|
Speed |
0.06~0.1m/s |
||||||||
|
Control voltage |
24V/DC |
||||||||
|
Power Output |
1.1~2.2KW |
||||||||
|
Voltage |
As per your local Standard(single phase or three phase) |
||||||||
|
Drive System |
Hydraulic pump station and electric motor (See details below) |
||||||||
|
Control Mode |
Automatic travel switch(See details below) |
||||||||
|
Drive Control |
Self-resetting system |
||||||||
|
Overload |
Over current relay protection |
||||||||
|
Materials |
Aluminium rails and guard with spraying plastics. (See details below) |
||||||||
|
Working Condition |
Both indoors and outdoors -20°~70°C |
||||||||
|
Entrance-Exit Way |
It’s customized 90°or 180° |
||||||||
|
Installation |
No pit installing,easy to install and remove <3.0m,installed directly on the floor. >3.0m, installed both on the floor and on the wall. |
||||||||
|
Switches (See details below) |
|
||||||||
|
20’ Container Load |
2pcs |
2pcs |
1pc |
1pc |
1pc |
1pc |
1pc |
/ |
/ |
|
40’ Container Load |
4pcs |
4pcs |
3pcs |
3pcs |
2pcs |
2pcs |
2pcs |
1pc |
1pc |
Details
|
Switch 1: Control panel on platform |
Switch 2: Remote control |
|
|
|
|
Switch 3: Two column control: one is on ground floor; another can be fixed at any floor needed. |
Two Travel Switches.One plays an important role of slow down while approaching the ground. The other one cut off the power when reach the bottom. |
|
|
|
|
Whole aluminum rails. All refined aluminum parts are produced by mould,rather than rude welded iron. |
All bolts and screws are stainless steel,being used to assemble and fix each parts together |
|
|
|
|
Hydraulic Pump Station and Electric Motor |
Strengthening Ribs,to fix the cylinder and reinforce the whole structure |
|
|
|
|
Up converter：Rise slowly and keep steady during operation. |
The protection Chain. Helping up-down,keep balance and maintain steady,protecting the safety of a suddenly drop. |
|
|
|
|
Safety Sensor. During the falling,it will stop if there are object below. |
Safety Sensor. During the falling,it will stop if there are object below. |
|
|
|
|
Emergency Decline Bar |
Electric Magnetic Valve. Pull the “manual down”to go down through”Emergency Decline Bar” control the electric magnetic valve. |
|
|
|
|
Optional Ramp fixed on the ground,static |
Optional Automatic Ramp, up and down with the car automatically |
|
|
|
|
Japan Seal. It ensure the close fitting,more durable |
Slide Block: Nylon-antifraying,good noise reduction |
|
|
|
|
Fixed Structure,strong and durable enough |
Supporting Legs,keep balance |
|
|
|
|
Hydraulic Pump Station and Electric Motor |
Strengthening Ribs,to fix the cylinder and reinforce the whole structure |
Product detail pictures:
Related Product Guide:
MOBILE ORDER PICKER equipment is a material handling equipment that is popular all over the world, and you can almost see him in any large warehouse. Shelves in warehouses are usually very high. If the MOBILE ORDER PICKER equipment is not used, the workers cannot reach the high-rise goods, so the MOBILE ORDER PICKER equipment is designed. Why is MOBILE ORDER PICKER equipment specially designed for warehouse cargo handling? First of all, the MOBILE ORDER PICKER equipment adopts a self-propelled control method, that is to say, workers can stand on the table and drive the MOBILE ORDER PICKER equipment to shuttle between the shelves like a vehicle. This control method greatly improves work efficiency. In the warehouse, the transmission ladder or scaffolding is still used as a solution to pick up the goods. This kind of work efficiency is very low. The use of MOBILE ORDER PICKER equipment can maximize the work efficiency. After a long calculation, it is very important to use the budget to buy MOBILE ORDER PICKER equipment. Cost-effective. In addition, MOBILE ORDER PICKER equipment also specially designed a workbench for placing goods. In this way, while taking the goods, it can provide space for the goods to be placed. without affecting the worker's standing position. And, the guardrail of MOBILE ORDER PICKER equipment is also carefully designed. The guardrails on both sides can be opened so that when workers face the shelves on the side, it is necessary to cross the guardrails to take the goods and it is dangerous. The battery, controller, pump station and other important components of the MOBILE ORDER PICKER equipment are all made of well-known brands, durable and have excellent working performance. The battery capacity can support a whole day of work after one full charge. If the frequency of use is not particularly high, it can be supported. Three to five working days. Peace of mind and convenience. OEM/ODM China Glass Suction Cup Lifter - Vertical Wheelchair Lift – Daxin , The product will supply to all over the world, such as: Iran, Roman, Algeria,
By Melissa from Romania - 2017.02.28 14:19
Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
By Martha from Benin - 2018.10.31 10:02
