Contact Information:

Qingdao Daxin Machinery Co Ltd

www.daxmachinery.com

Email:sales@daxmachinery.com

Whatsapp:+86 15192782747

Scissor aerial work platform advantages: It is a special equipment for aerial work with a wide range of uses. Its scissor mechanical structure makes the lifting platform more stable. The large working platform and high load-bearing capacity make the working range at height larger and suitable for multiple people working at the same time.
1: Stable structure, large carrying capacity, stable lifting, simple maintenance
2: Strong adaptability, can be used in harsh environments and general explosion-proof places
3: It is widely applicable, suitable for customers who have high-altitude operations requirements such as factory workshops, squares, lobbies, airports, and parks.
4: High safety, using upper and lower double-control safe low-voltage operation buttons, equipped with one-button emergency stop and emergency lowering device for accidental power loss, which improves the safety of the equipment.

Instructions
1. Support the four legs of the platform firmly and horizontally before use.
2. Turn on the power, operate the lifting button on the electric control box, the platform can be raised and lowered.
3. Operate the up button, the platform can be raised (when the platform cannot be raised, the motor will turn to reverse direction. As long as the power cord wiring sequence is changed, the motor can rotate forward.); operate the down button and the platform can be lowered.
4. The platform is equipped with remote control buttons, which can also be operated up and down while standing on the platform.
The platform is equipped with an emergency lowering valve, which is used for emergency lowering operation in the event of a power failure. Loosen the lowering handle counterclockwise by hand, and the platform can be slowly lowered. After tightening clockwise, the platform stops descending.

Advantages and safety of electric lifts
Safety protection measures: The hydraulic valve block is equipped with an automatic locking device, an emergency pressure relief drop valve, and a limit switch for raising the limit. Automatic protection and automatic adjustment when the platform exceeds the working area, platform overload alarm, self-locking device system, 5° tilt protection device, interlocking device between axle expansion and boom, platform up and down adjustment balance system and pressure overload protection device, fault alarm and self diagnosis.